Learn What's Going On!

Flying High

Flying High

Jack Roush always liked Mustangs, but he loves “Old Crow”

by Lazelle D. Jones
from Richard Petty’s Stock Car, December 1998

I’m convinced the only reason Jack Roush hesitated to acknowledge my presence in the garage area at
the Charlotte Motor Speedway was because I blurted out the words “P51 Mustang.”

Richard Petty’s Stock Car had asked me to find out about Roush’s unique avocation that involves the
restoration and flying of his own P51. As Roush is unique in his own way, the Mustang is also unique,
having played an essential role in bringing the worst conflict in this century (WWII) to an end.

Trying first to work through the PR people who were not as concerned about the assignment as I was, I
opted to lurk outside the #6 Valvoline transporter and wait for a slight man, wearing a straw hat, to
appear. It paid off, and after being told three times to come back, Roush finally beckoned me inside the
transporter to talk. I was not quite prepared for the passion this motorsports giant and Winston Cup
guru has for his P51 Mustang that he named “Old Crow.” After about a half hour, he said, “Be at the
Concord airport tomorrow morning at 8 a.m. and I’ll show you the aircraft.” He had flown it down from
Michigan for the Coca‐Cola 600 and was flying it home the next morning following the race. The other
thing about this interview is that not once did we ever touch the subject of motorsports or racing.
Aviation and Old Crow are Roush’s respite from the harried world of NASCAR. We talked only “P51 talk.”
It was generous of him to take the time, and I thank him.

Jack Roush has had an interest in “war birds” all of his life. About 10 years ago he began to think
seriously about the fun that would go along with owning a P51. He wanted to know how they were
maintained, what the engines were like, everything about them. About five years ago his network of
pilot friends began looking for Mustangs for him. He told me that the effort became almost a frenzy.
Every time a P51 came on the market anywhere in the world, somebody would call him to say, “Hey, this
airplane’s for sale.” Roush had to make up his mind whether he was going to be a player or simply
someone who sat on the sidelines. He looked at a couple of Mustangs, deciding on one in Michigan that
had been in the U.S. Training Command from 1944 through 1947, after which it had been sold to the
Canadian military. It was returned to the civilian registry in the United States in 1952.

The aircraft had no corrosion on it, and when he disassembled it, Roush found that the original piece of
Plexiglas that was installed at the factory in 1944 was in good shape. The modifications that had been
made to the by the various previous owners had degraded the airplane, Roush said, so he totally
disassembled it and put back together a stock Mustang. It is now organized with instrumentation that
makes it safe as an instrumentation flight rules (IFR) airplane. It also has a fresh engine. He flew it the
first four and a half years with the engine that was in it when he purchased it. The engine is a Merlin
Rolls Royce, 60‐degree V‐12, with a 1,650ci displacement that produces about 1,600 hp. It has a two‐
speed supercharger, and with this configuration, the P51 is capable of flying up to a ceiling of 41,000
feet.

Jack Roush typically flies Old Crow in the 20,000‐foot range, and he wears an oxygen mask when he flies
it. The aircraft has a glide ratio of three miles per 1,000 feet, which Roush says would give him
considerable margin to find an airport where he could safely land, should he ever experience engine
failure.

At 20,000 feet, he explained, he can glide just under 60 miles. Roush has now flown Old Crow about 350
hours.

The aircraft is painted up like the P51 Colonel Bud Anderson flew in WWII, which was also called “Old
Crow.” Colonel Anderson distinguished himself for his effectiveness as a fighter pilot over Europe. He
also flew with Chuck Yeager in Europe, the same Chuck Yeager who later gained fame as being the first
person to break the sound barrier and attain a number of other firsts in altitude records during his test‐
pilot years. Colonel Anderson is an important facet of this airplane. He’s still a pilot, and is in his mid‐70s.
Gary Honbarrier, a friend of Roush’s has a plane painted up like Chuck Yeager’s famous “Glamorous
Glenn.” Roush and Honbarrier have sponsored Anderson and Yeager at a couple of dozen airshows in
the last four years. Yeager and Anderson fly Glamorous Glenn and Old Crow (respectively) at WWII
memorabilia events in which they have an interest.

Roush flies “old Crow” down to Daytona and to Charlotte, North Carolina, in the winter. The remainder
of the time, “It’s real sporadic,” said Roush. Other flights are based on the weather, which Roush
evaluates before making the decision to fly Old Crow. He said, “Old Crow is a good IFR aircraft; that is, if
there isn’t fog and the ceiling is low.” He doesn’t like to fly at night, and if the ceiling is low, he won’t
subject himself or the aircraft to the risks associated with the loss of an engine in poor visibility. Old
Crow is hangered in Michigan at Willow Run, the same airfield Henry Ford built for the B254 bomber
plant during WWII. At one time, Old Crow was hangered in the same building where Packard built and
tested the engines used in P51s. In the United States, Packard was licensed by Rolls Royce to build these
engines during the war. Between 1943 and the end of the war, Packard built 100,000 of them.

Roush went on to explain that North America built about 14,000 P51s during the war. At level flight,
31,000 feet, it had a top speed of 440 mph. It was redlined at a true air speed of 505 mph and was
recognized by both sides as being the best all‐around fighter in the war. IT gets about 5 miles per gallon
(about the same as a Winston Cup car), and with the fuel it was designed to carry, a P51 could be
airborne between 8 and 10 hours. Old Crow uses only the internal tanks, which allows Roush to take off
from Detroit and fly to Miami Beach nonstop. It takes him about four hours.

Old Crow is not the only aircraft Roush owns. He has several, including a corporate jet. He has owned a
twin engine and an eight‐passenger Cessna for the last 13 years, but it wasn’t until he bought the P51
that he became serious about getting a pilot’s license. It took Roush about a year to restore the Mustang
and another 14 months of flight school and training so that he was insurable. Since starting flight
training he has also earned a Multi‐Engine Rating, an Instrument Rating, a Commercial Rating, and his
Airline Transport Pilot Rating. As I said initially, flying, in particular his Mustang, is Jack Roush’s passion.
All total, he’s accumulated about 2,500 hours of flight time in four years. Last year he flew 800 hours. To
put that into perspective, the normal number of hours a person works in a year is 2,000. So in addition
to owning and directing five Winston Cup teams, he spent 40 percent of a normal work year flying his
airplanes. His race shops are in North Carolina, and he makes the trip there once a week, and he pilots
his planes to each of the Winston Cup events.

Two years ago he flew Old Crow 180 hours. Last year he flew her 150 ours. This season he sees it
dropping to 130 hours because of the Winston Cup schedule. However, he has no intention of letting
that diminishing trend continue. He said, “I’m going to fight to stay in the 150‐hours‐per‐year range in
my Mustang.

Roush talked about what flying Old Crow means to him, and the important role he now plays in the
history of the aircraft. He said, “To think that 95 percent of the people who designed this aircraft, who
machined the initial parts, who flew it in combat, their time has come and gone. I’m now the custodian,
the steward of this technology, and I feel the honor of doing that.” In Roush’s own words, “The P51 was
the fighter that made it possible to protect the bombing raids over Europe; that ultimately stopped
Hitler’s program to develop atomic weapons.”

It is also his passion to find people who have damaged P51s or spare parts, to collect those, and to
engage in an effort to restore them to an airworthy condition. Roush has a second P51 that’s in the
process of being restored. It was severely damaged in an accident in Florida and would have been
scrapped, except for the fact that he bought it. He and his new partner, Honbarrier, expect it will take
three to four years to finish the restoration project. Then they will have a fully restored TF model, a two‐
seat trainer with two complete sets of controls that they can fly past the time when they can maintain
single‐pilot status with the FAA.

I asked Roush how he learned to fly a P51 when there are so few around in which to train. HE explained,
“You need to climb the ladder of airplanes that are this type of configuration, that elevate you into
increasingly faster and more complex aircraft.” His initial trainer was a basic ’47 Piper Cub. Like the P51
it is a tail‐dragger, with the center of mass located behind the front wheels. He flew the Piper Cub 65
hours, figuring out its ground handling characteristics as opposed to one with tricycle‐type landing gear
where the center of mass is positioned forward of the front wheels in the aircraft. Next he found a ’44
North American SMJ‐5, a two‐seat trainer that was used to train fighter pilots during WWII. Before he
could use it, he first had to get the trainer in shape to fly, and then he trained in it for 100 hours.
Following that, Roush enrolled himself in the Crazy Horse Training School in Florida, a flight school that
specializes in training pilots to fly P51s. Upon completion of that school, his insurance company blessed
him and insured him at the lowest possible rate to fly Old Crow.

Roush explained how he was in the cockpit the first time he took Old Crow up, organizing everything,
going through the check list, and then he realized that he still had his straw hat on, the one his is always
seen wearing a the Winston Cup events. Roush said, “I told the guy who was assisting me to keep an eye
on my hat because I might need it later.” When asked what he felt the first time he taxied Old Crow out
to takeoff, he said, “I felt like I was going to the moon. As I picked up speed and the tail wheel lifted, I
was just screaming inside. This was the type of emotion that rivaled the birth of my children.”

Roush in his own words is “a risk taker,” “a managed risk taker.” By education he’s a mathematician with
an advanced degree in mathematics and a minor in physics. “The miracle of flight is a gratifying and
satisfying experience for me. I can have the most horrible day at the racetrack or have problems that I
can’t solve, that are driving me crazy in my engineering operations, and to go up in my airplane and fly
to a business meeting or to a racetrack, it’s just another world. Nothing is more relaxing or makes me
feel more alive than flying.” Roush continued his explanation that flying has its associated risks. “A day
without a risk that I can manage, a situation that I can assess and make reasonable decision about, that
will keep me out of harm’s way, is an uninteresting day for me. Life without that would be very boring.”

Aviation News

Top
Menu

Pistons

Roush Aviation’s FAA PMA pistons are machined from Aerospace Quality 2618-T61 Aluminum Forgings. Using technology and knowledge gained from experience in motorsports and performance engine development, our pistons are redesigned from the original Packard and Rolls Royce Pistons to create a piston with better operating characteristics over the original piston design. All of our pistons now come standard with anodized piston ring grooves and domes. Additionally, our pistons can be ordered with our optional thermal barrier dome coating and / or optional friction reducing skirt coating. Pistons are available for 5.395”, 5.400”, 5.403” and 5.405” bore sizes.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com>

 

Piston Rings

Roush Aviation’s FAA PMA piston rings are designed to operate as a set to work with our PMA piston. The ring set consists of a moly filled steel compression ring, a moly filled steel oil scraper ring, and a two piece iron oil supply ring. This modern ring package provides optimum compression sealing and oil control, with a reduction in drag from the original ring package.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Piston Pins

Roush Aviation’s FAA PMA piston pins are manufactured from aerospace quality AMS 6260 steel alloy. These pins are designed as replacements for the stronger Rolls Royce Transport Style Piston Pins. Our PMA pins are available in sizes from Standard to 0.020” oversize.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Piston Pin Bushings

Roush Aviation’s FAA PMA piston pins are manufactured from aerospace quality Aluminum Bronze alloy. Our PMA bushings are precision machined to higher quality and tolerances than the original parts. Our PMA Bushings are available in sizes from Standard to 0.020” oversizes.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Cylinder Head Nuts (V-1650 and Transport)

FAA PMA Steel Head Nuts are a direct replacement for the original bronze nuts. These nuts are made from AN fastener grade material and are substantially stronger than the original Packard or Rolls Royce parts. Available for Packard and Rolls Royce Transport styles.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Camshafts (V-1650-7, -9, Transport D26917)

FAA PMA camshafts made from aerospace grade 8620 material and available in three different profiles: V-1650-7, V-1650-9, and Rolls Royce Transport 620 (D26917). Camshafts are selectively hardened on the lobe surfaces only with a thicker cross section on the quill to alleviate the problem of cracking found with original camshafts.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Roller Camshafts and Rocker Arms

FAA PMA Roller Camshaft Package. This is ultimate upgrade for the Merlin Engine. Reduced maintenance, virtually no wear, no chrome or carbide pads to worry about. Our special roller camshafts are manufactured to the same detailed processes of our standard camshafts. However, they are specially ground to work with our FAA PMA 17-4PH stainless steel roller rocker arms.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Valve Springs Sets (V-1650-7, -9 and Transport)

FAA PMA replacement valve springs manufactured to the highest quality spring wire and tested to over 10 million cycles without failure. Available in sets to work with V-1650-7, V-1650-9, and Rolls Royce Transport engine spring seats and retainers. Available in sets only, not available individually.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Inlet Valves

FAA PMA replacement Inlet Valves, manufactured from Inconel X751 with Stellite weld inlay on the seat and tip surfaces. Our valves are manufactured from a stronger high temp alloy material than the original valves. Our FAA PMA Valves are compatible with original valve seats and guides or our FAA Approved valve seats and guides.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Exhaust Valves

FAA PMA replacement Inlet Valves, manufactured from Inconel X751 with Stellite weld inlay on the seat surfaces and a tool steel tip. Our valves are manufactured from a stronger high temp alloy material than the original valves and are sodium filed like the original valves. Our FAA PMA Valves are compatible with original valve seats and guides or our FAA Approved valve seats and guides.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Spark Plug Insert

FAA PMA replacement Spark Plug Insert manufactured to the original drawings and specifications.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Spark Plug Insert Nut

FAA PMA replacement Spark Plug Insert manufactured to the original drawings and specifications.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Ignition Harness

FAA PMA replacement Ignition Harness and Spark Plugs. Stop using old, unknown condition, expensive spark plugs. Switch to our ignition harness and spark plugs and save money and maintenance time. Our Harness has been thoroughly tested in all conditions, up to 37,000 ft altitude, rain, IMC conditions, without failure, issue, or increase in RFI noise.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

RA-QL57 Spark Plugs for Ignition Harness

FAA PMA replacement Ignition Harness and Spark Plugs. Stop using old, unknown condition, expensive spark plugs. Switch to our ignition harness and spark plugs and save money and maintenance time. Our Harness has been thoroughly tested in all conditions, up to 37,000 ft altitude, rain, IMC conditions, without failure, issue, or increase in RFI noise

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

3/8” Exhaust Stud

FAA PMA replacement 3/8” exhaust stud hardware manufactured from stainless steel to decrease degradation due to corrosion. FAA PMA’d for V-1650-9 and Rolls Royce Transport, and available as an upgrade to V-1650-7 cylinder heads through our FAA Repair Station.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

3/8” Exhaust Stud Nut

FAA PMA replacement 3/8” exhaust stud hardware manufactured from stainless steel to decrease degradation due to corrosion. FAA PMA’d for V-1650-9 and Rolls Royce Transport, and available as an upgrade to V-1650-7 cylinder heads through our FAA Repair Station.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

3/8” Exhaust Stud Lock Washer

FAA PMA replacement 3/8” exhaust stud hardware manufactured from stainless steel to decrease degradation due to corrosion. FAA PMA’d for V-1650-9 and Rolls Royce Transport, and available as an upgrade to V-1650-7 cylinder heads through our FAA Repair Station.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Coolant Header Tank Pressure Cap

FAA PMA replacement Coolant Header Tank Pressure Cap. Our Cap contains a schrader valve in the cap to pre-pressurize the coolant system before flight or use it to pressurize a cold system to perform a maintenance leak check. Pre-pressurization of coolant system with shop air to 14-15 psi prior to operation will increase the boiling point of the coolant by 45°F (25°C). This will reduce the risk of having localized boiling in the cylinder head which leads to cylinder head cracking. Our Header Tank Pressure Cap is also available with an o-ring type seal, by sending your header tank to our FAA Repair Station for alteration. Additionally both caps are available with oversize threads to repair header tanks with damaged threads.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Coolant Header Tank Pressure Relief Valve

FAA PMA replacement Coolant Tank Pressure Relief Valve. Our FAA PMA Relief Valve is designed to accurately control coolant system pressure at 34-36 psi. This Valve does not open early and bleed off pressure before its set opening point like the original valve.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Propeller Shaft Seal

FAA PMA replacement Propeller Shaft Seal. Our FAA PMA replacement propeller shaft seal is made by the original manufacturer using newer technologies in shaft seal design.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Supercharger Impeller Shaft Sealing Rings

FAA PMA Supercharger Sealing Rings. Our FAA PMA Supercharger Impeller Shaft Sealing Rings are manufactured to the original drawings, materials, and specifications. Both front and rear rings available.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Wheelcase Stud

FAA PMA replacement Wheelcase Attaching Studs. Our FAA PMA Wheelcase Studs are made to the original drawing and specifications using stronger material. This joint of the Merlin engine sees high loads due to the transmission of power to the supercharger. Manufactured and FAA PMA’d to replace worn and fatigued original studs.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com

Rocker Arm Lash Adjusting Tool

Roush Aviation Rocker Arm Lash Adjusting Tool with built in Torque wrench. Built-in torque wrench allows proper lash adjustment and torque tightening of tappet.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com>

 

Timing Plug Socket

Socket specially made for removing timing plug from lower crankcase.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com>

Propeller Shaft Rotating Tool

Tool to rotate the crankshaft, when the propeller is off the engine.

Bill Armour, Part Sales
Office: 734-779-7365, Fax: 734-779-7997
Email: William.Armour@Roush.com>